Delegated Authentication - Authentication Policy

Service definitions may be conditionally authorized to use an external identity provider by defining their own access strategy and authentication policy:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

{
  "@class" : "org.apereo.cas.services.RegexRegisteredService",
  "serviceId" : "sample",
  "name" : "sample",
  "id" : 100,
  "accessStrategy" : {
    "@class" : "org.apereo.cas.services.DefaultRegisteredServiceAccessStrategy",
    "delegatedAuthenticationPolicy" : {
      "@class" : "org.apereo.cas.services.DefaultRegisteredServiceDelegatedAuthenticationPolicy",
      "allowedProviders" : [ "java.util.ArrayList", [ "Facebook", "Twitter" ] ],
      "permitUndefined": true,
      "exclusive": false
    }
  }
}

The following fields are supported for the authentication policy:

Type Description
allowedProviders The list of allowed providers should contain the external identity provider names (i.e. client names).
permitUndefined Decides whether access should be granted in the event that no allowed providers are defined explicitly.
exclusive Decides whether authentication should be exclusively limited to allowed providers, disabling other methods such as username/password, etc.

Configuration

The following settings and properties are available from the CAS configuration catalog:

The configuration settings listed below are tagged as Required in the CAS configuration metadata. This flag indicates that the presence of the setting may be needed to activate or affect the behavior of the CAS feature and generally should be reviewed, possibly owned and adjusted. If the setting is assigned a default value, you do not need to strictly put the setting in your copy of the configuration, but should review it nonetheless to make sure it matches your deployment expectations.

The configuration settings listed below are tagged as Optional in the CAS configuration metadata. This flag indicates that the presence of the setting is not immediately necessary in the end-user CAS configuration, because a default value is assigned or the activation of the feature is not conditionally controlled by the setting value. You should only include this field in your configuration if you need to modify the default value.

Configuration Metadata

The collection of configuration properties listed in this section are automatically generated from the CAS source and components that contain the actual field definitions, types, descriptions, modules, etc. This metadata may not always be 100% accurate, or could be lacking details and sufficient explanations.

Be Selective

This section is meant as a guide only. Do NOT copy/paste the entire collection of settings into your CAS configuration; rather pick only the properties that you need. Do NOT enable settings unless you are certain of their purpose and do NOT copy settings into your configuration only to keep them as reference. All these ideas lead to upgrade headaches, maintenance nightmares and premature aging.

YAGNI

Note that for nearly ALL use cases, declaring and configuring properties listed here is sufficient. You should NOT have to explicitly massage a CAS XML/Java/etc configuration file to design an authentication handler, create attribute release policies, etc. CAS at runtime will auto-configure all required changes for you. If you are unsure about the meaning of a given CAS setting, do NOT turn it on without hesitation. Review the codebase or better yet, ask questions to clarify the intended behavior.

Naming Convention

Property names can be specified in very relaxed terms. For instance cas.someProperty, cas.some-property, cas.some_property are all valid names. While all forms are accepted by CAS, there are certain components (in CAS and other frameworks used) whose activation at runtime is conditional on a property value, where this property is required to have been specified in CAS configuration using kebab case. This is both true for properties that are owned by CAS as well as those that might be presented to the system via an external library or framework such as Spring Boot, etc.

When possible, properties should be stored in lower-case kebab format, such as cas.property-name=value. The only possible exception to this rule is when naming actuator endpoints; The name of the actuator endpoints (i.e. ssoSessions) MUST remain in camelCase mode.

Settings and properties that are controlled by the CAS platform directly always begin with the prefix cas. All other settings are controlled and provided to CAS via other underlying frameworks and may have their own schemas and syntax. BE CAREFUL with the distinction. Unrecognized properties are rejected by CAS and/or frameworks upon which CAS depends. This means if you somehow misspell a property definition or fail to adhere to the dot-notation syntax and such, your setting is entirely refused by CAS and likely the feature it controls will never be activated in the way you intend.

Validation

Configuration properties are automatically validated on CAS startup to report issues with configuration binding, specially if defined CAS settings cannot be recognized or validated by the configuration schema. The validation process is on by default and can be skipped on startup using a special system property SKIP_CONFIG_VALIDATION that should be set to true. Additional validation processes are also handled via Configuration Metadata and property migrations applied automatically on startup by Spring Boot and family.

Indexed Settings

CAS settings able to accept multiple values are typically documented with an index, such as cas.some.setting[0]=value. The index [0] is meant to be incremented by the adopter to allow for distinct multiple configuration blocks.

Auto Redirection

By default, the list of available identity providers are displayed in a selection menu and the user is allowed to choose the provider. In certain scenarios, the browser may be instructed to auto-redirect to a pre-selected identity provider.

Pre-selected Identity Provider

An identity provider can be instructed via CAS configuration to always perform an auto-redirect, regardless of the application type and/or authentication requests. The selected identity provider is considered by CAS to be the primary strategy for handling authentication requests.

Identity Provider Exclusivity

Authentication requests from the following application will be auto-redirected to the identity provider that is identified as Twitter in the CAS configuration, since the delegated authentication policy only allows the single exclusive use of this provider, removing selection menu and the ability to choose other alternative authentication methods.

1
2
3
4
5
6
7
8
9
10
11
12
13
14

{
  "@class" : "org.apereo.cas.services.RegexRegisteredService",
  "serviceId" : "sample",
  "name" : "sample",
  "id" : 100,
  "accessStrategy" : {
    "@class" : "org.apereo.cas.services.DefaultRegisteredServiceAccessStrategy",
    "delegatedAuthenticationPolicy" : {
      "@class" : "org.apereo.cas.services.DefaultRegisteredServiceDelegatedAuthenticationPolicy",
      "allowedProviders" : [ "java.util.ArrayList", [ "Twitter" ] ],
      "exclusive": true
    }
  }
}

A chosen identity provider from the selection menu can be optionally tracked and stored using a dedicated cookie, which will then be used on subsequent attempts to auto-redirect to the identity provider, skipping the selection menu.

The following settings and properties are available from the CAS configuration catalog:

The configuration settings listed below are tagged as Required in the CAS configuration metadata. This flag indicates that the presence of the setting may be needed to activate or affect the behavior of the CAS feature and generally should be reviewed, possibly owned and adjusted. If the setting is assigned a default value, you do not need to strictly put the setting in your copy of the configuration, but should review it nonetheless to make sure it matches your deployment expectations.

The configuration settings listed below are tagged as Optional in the CAS configuration metadata. This flag indicates that the presence of the setting is not immediately necessary in the end-user CAS configuration, because a default value is assigned or the activation of the feature is not conditionally controlled by the setting value. You should only include this field in your configuration if you need to modify the default value.

Configuration Metadata

The collection of configuration properties listed in this section are automatically generated from the CAS source and components that contain the actual field definitions, types, descriptions, modules, etc. This metadata may not always be 100% accurate, or could be lacking details and sufficient explanations.

Be Selective

This section is meant as a guide only. Do NOT copy/paste the entire collection of settings into your CAS configuration; rather pick only the properties that you need. Do NOT enable settings unless you are certain of their purpose and do NOT copy settings into your configuration only to keep them as reference. All these ideas lead to upgrade headaches, maintenance nightmares and premature aging.

YAGNI

Note that for nearly ALL use cases, declaring and configuring properties listed here is sufficient. You should NOT have to explicitly massage a CAS XML/Java/etc configuration file to design an authentication handler, create attribute release policies, etc. CAS at runtime will auto-configure all required changes for you. If you are unsure about the meaning of a given CAS setting, do NOT turn it on without hesitation. Review the codebase or better yet, ask questions to clarify the intended behavior.

Naming Convention

Property names can be specified in very relaxed terms. For instance cas.someProperty, cas.some-property, cas.some_property are all valid names. While all forms are accepted by CAS, there are certain components (in CAS and other frameworks used) whose activation at runtime is conditional on a property value, where this property is required to have been specified in CAS configuration using kebab case. This is both true for properties that are owned by CAS as well as those that might be presented to the system via an external library or framework such as Spring Boot, etc.

When possible, properties should be stored in lower-case kebab format, such as cas.property-name=value. The only possible exception to this rule is when naming actuator endpoints; The name of the actuator endpoints (i.e. ssoSessions) MUST remain in camelCase mode.

Settings and properties that are controlled by the CAS platform directly always begin with the prefix cas. All other settings are controlled and provided to CAS via other underlying frameworks and may have their own schemas and syntax. BE CAREFUL with the distinction. Unrecognized properties are rejected by CAS and/or frameworks upon which CAS depends. This means if you somehow misspell a property definition or fail to adhere to the dot-notation syntax and such, your setting is entirely refused by CAS and likely the feature it controls will never be activated in the way you intend.

Validation

Configuration properties are automatically validated on CAS startup to report issues with configuration binding, specially if defined CAS settings cannot be recognized or validated by the configuration schema. The validation process is on by default and can be skipped on startup using a special system property SKIP_CONFIG_VALIDATION that should be set to true. Additional validation processes are also handled via Configuration Metadata and property migrations applied automatically on startup by Spring Boot and family.

Indexed Settings

CAS settings able to accept multiple values are typically documented with an index, such as cas.some.setting[0]=value. The index [0] is meant to be incremented by the adopter to allow for distinct multiple configuration blocks.

Identity Provider Groovy Selection

The auto-redirection strategy of a given identity provider may also be decided dynamically via a Groovy resource whose path is defined via CAS settings. The Groovy script would have the following outline:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

import org.apereo.cas.web.*

def run(Object[] args) {
    def requestContext = args[0]
    def service = args[1]
    def registeredService = args[2]
    def provider = args[3] as DelegatedClientIdentityProviderConfiguration
    def logger = args[4]
    logger.info("Checking ${provider.name}...")
    
    if (provider.name.equals("Twitter")) {
        provider.autoRedirectType = DelegationAutoRedirectTypes.CLIENT
        return provider
    }
    return null
}

The following parameters are passed to the script:

Parameter Description
requestContext Reference to the Spring Webflow request context, as RequestContext.
service Reference to the application authentication request as Service, if any.
registeredService Reference to registered service definition, if any.
provider Reference to the identity provider configuration identified as DelegatedClientIdentityProviderConfiguration.
logger The object responsible for issuing log messages such as logger.info(...).

Identity Provider Custom Selection

If you wish to create your own redirection strategy, you will need to design a component and register it with CAS as such:

1
2
3
4

@Bean
public DelegatedClientIdentityProviderRedirectionStrategy delegatedClientIdentityProviderRedirectionStrategy() {
    return new CustomDelegatedClientIdentityProviderRedirectionStrategy(); 
}

See this guide to learn more about how to register configurations into the CAS runtime.